[c-nsp] Wired - ISE Posture + AnyConnect (ISEPostureCFG.xml not found)

[Manu Chao]

I am running a PoC with ISE (802.1x up/running) with Posture with AnyConnect on wired PC (win7).

Could you please share ISEPostureCFG.xml (not found, using default) to be configured on wired PC?

Right now, AnyConnect ISE Posture module installed on wired computer cannot detect ISE servers:
- No policy server detected

R/
Manu
_______________________________________________
cisco-nsp mailing list cisco-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

[Manu Chao]

Any help?

Post by Manu Chao
I am running a PoC with ISE (802.1x up/running) with Posture with AnyConnect on wired PC (win7).
Could you please share ISEPostureCFG.xml (not found, using default) to be configured on wired PC?
- No policy server detected
R/
Manu

_______________________________________________
cisco-nsp mailing list cisco-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

[Łukasz Bromirski]

Hi Manu,

Post by Manu Chao
I am running a PoC with ISE (802.1x up/running) with Posture with AnyConnect on wired PC (win7).
Could you please share ISEPostureCFG.xml (not found, using default) to be configured on wired PC?
- No policy server detected

PoC is usually assisted by one of Cisco Partners. Try to
look up them using Partner Locator
(http://www.cisco.com/go/partnerlocator) and ask for help.