[c-nsp] A9K-ISM-100 with A9K-RSP440-SE ??

[a***@netconsultings.com]

Hi gents,

I got the following when inserted ISM module into ASR9k the other day, would
you know what is it complaining about?
This line card does not use NPs, and is neither Trident-based nor
Typhoon-based so should not complain about too new XR version.
And the mixed mem note can be ignored.

The system is running 6.2.3

Node Type State Config State
----------------------------------------------------------------------------
-
0/RSP0/CPU0 A9K-RSP440-SE(Active) IOS XR RUN PWR,NSHUT,MON
0/RSP1/CPU0 A9K-RSP440-SE(Standby) IOS XR RUN PWR,NSHUT,MON
0/0/CPU0 A9K-36x10GE-TR IOS XR RUN PWR,NSHUT,MON
0/4/CPU0 A9K-ISM-100(LCP) IN-RESET PWR,NSHUT,MON
0/7/CPU0 A9K-36x10GE-TR IOS XR RUN PWR,NSHUT,MON


RP/0/RSP0/CPU0:Nov 12 18:04:23.838 : shelfmgr[420]:
%PLATFORM-SHELFMGR_HAL-7-CAN_INFO : Can API: slot 6 online event.
RP/0/RSP0/CPU0:Nov 12 18:04:23.846 : shelfmgr[420]:
%PLATFORM-SHELFMGR-3-INCOMPATIBLE_LC_FOR_CHASSIS : Node 0/4/CPU0 has an
incompatible card_type of 0x1000305 for this chassis/RSP type/FC.
RP/0/RSP0/CPU0:Nov 12 18:04:23.848 : shelfmgr[420]:
%PLATFORM-SHELFMGR-3-MIXED_MEMORY_POWERED : Node 0/4/CPU0 is powered, system
running mixed line card memory mode
RP/0/RSP0/CPU0:Nov 12 18:04:23.848 : shelfmgr[420]:
%PLATFORM-SHELFMGR-3-MIXED_MEMORY_ALARM : System enters mixed line card
memory mode
RP/0/RSP0/CPU0:Nov 12 18:04:23.849 : shelfmgr[420]:
%PLATFORM-SHELFMGR-6-NODE_STATE_CHANGE : 0/4/CPU0 A9K-ISM-100 state:IN-RESET

RP/0/RSP0/CPU0:Nov 12 18:04:23.857 : invmgr[261]: %PLATFORM-INV-6-OIRIN :
OIR: Node 0/4/CPU0 Sn: FOC1832NFHW inserted
RP/0/RSP0/CPU0:Nov 12 18:05:09.015 : ce_switch_srv[54]:
%PLATFORM-CE_SWITCH-6-UPDN : Interface 4 (LC_Slot_4) is up
RP/0/RSP1/CPU0:Nov 12 18:05:09.186 : ce_switch_srv[54]:
%PLATFORM-CE_SWITCH-6-UPDN : Interface 4 (LC_Slot_4) is up
RP/0/RSP0/CPU0:Nov 12 18:05:10.157 : ce_switch_srv[54]:
%PLATFORM-CE_SWITCH-6-UPDN : Interface 4 (LC_Slot_4) is down
RP/0/RSP0/CPU0:Nov 12 18:05:10.444 : ce_switch_srv[54]:
%PLATFORM-CE_SWITCH-6-UPDN : Interface 4 (LC_Slot_4) is up

Any pointers are very much appreciated

adam

netconsultings.com
::carrier-class solutions for the telecommunications industry::


_______________________________________________
cisco-nsp mailing list cisco-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

[Tom Hill via cisco-nsp]

Post by a***@netconsultings.com
I got the following when inserted ISM module into ASR9k the other day, would
you know what is it complaining about?
This line card does not use NPs, and is neither Trident-based nor
Typhoon-based so should not complain about too new XR version.
And the mixed mem note can be ignored.
The system is running 6.2.3

It's not listed in the release notes for 6.2.3 as being supported?

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/general/release/notes/b-release-notes-asr9k-623.html

There's a list of firmware versions for some reason, but not support.